` or a comment ``.
*
* If the first character of the `$content` chunk _isn't_ one
* of these syntax elements, which always starts with `<`, then
* the match had to be for the final alternation of `>`. In such
* case, it's probably standing on its own and could be encoded
* with a character reference to remove ambiguity.
*
* In other words, if this chunk isn't from a match of a syntax
* token, it's just a plaintext greater-than (`>`) sign.
*/
if ( ! str_starts_with( $content, '<' ) ) {
return '>';
}
/*
* When certain invalid syntax constructs appear, the HTML parser
* shifts into what's called the "bogus comment state." This is a
* plaintext state that consumes everything until the nearest `>`
* and then transforms the entire span into an HTML comment.
*
* Preserve these comments and do not treat them like tags.
*
* @see https://html.spec.whatwg.org/#bogus-comment-state
*/
if ( 1 === preg_match( '~^(?:]*>|]*>)$~', $content ) ) {
/**
* Since the pattern matches `` and also ``, this will
* preserve the type of the cleaned-up token in the output.
*/
$opener = $content[1];
$content = substr( $content, 2, -1 );
do {
$prev = $content;
$content = wp_kses( $content, $allowed_html, $allowed_protocols );
} while ( $prev !== $content );
// Recombine the modified inner content with the original token structure.
return "<{$opener}{$content}>";
}
/*
* Normative HTML comments should be handled separately as their
* parsing rules differ from those for tags and text nodes.
*/
if ( str_starts_with( $content, '' ), '', $content );
while ( ( $newstring = wp_kses( $content, $allowed_html, $allowed_protocols ) ) !== $content ) {
$content = $newstring;
}
if ( '' === $content ) {
return '';
}
// Prevent multiple dashes in comments.
$content = preg_replace( '/--+/', '-', $content );
// Prevent three dashes closing a comment.
$content = preg_replace( '/-$/', '', $content );
return "";
}
// It's seriously malformed.
if ( ! preg_match( '%^<\s*(/\s*)?([a-zA-Z0-9-]+)([^>]*)>?$%', $content, $matches ) ) {
return '';
}
$slash = trim( $matches[1] );
$elem = $matches[2];
$attrlist = $matches[3];
if ( ! is_array( $allowed_html ) ) {
$allowed_html = wp_kses_allowed_html( $allowed_html );
}
// They are using a not allowed HTML element.
if ( ! isset( $allowed_html[ strtolower( $elem ) ] ) ) {
return '';
}
// No attributes are allowed for closing elements.
if ( '' !== $slash ) {
return "";
}
return wp_kses_attr( $elem, $attrlist, $allowed_html, $allowed_protocols );
}
/**
* Removes all attributes, if none are allowed for this element.
*
* If some are allowed it calls `wp_kses_hair()` to split them further, and then
* it builds up new HTML code from the data that `wp_kses_hair()` returns. It also
* removes `<` and `>` characters, if there are any left. One more thing it does
* is to check if the tag has a closing XHTML slash, and if it does, it puts one
* in the returned code as well.
*
* An array of allowed values can be defined for attributes. If the attribute value
* doesn't fall into the list, the attribute will be removed from the tag.
*
* Attributes can be marked as required. If a required attribute is not present,
* KSES will remove all attributes from the tag. As KSES doesn't match opening and
* closing tags, it's not possible to safely remove the tag itself, the safest
* fallback is to strip all attributes from the tag, instead.
*
* @since 1.0.0
* @since 5.9.0 Added support for an array of allowed values for attributes.
* Added support for required attributes.
*
* @param string $element HTML element/tag.
* @param string $attr HTML attributes from HTML element to closing HTML element tag.
* @param array[]|string $allowed_html An array of allowed HTML elements and attributes,
* or a context name such as 'post'. See wp_kses_allowed_html()
* for the list of accepted context names.
* @param string[] $allowed_protocols Array of allowed URL protocols.
* @return string Sanitized HTML element.
*/
function wp_kses_attr( $element, $attr, $allowed_html, $allowed_protocols ) {
if ( ! is_array( $allowed_html ) ) {
$allowed_html = wp_kses_allowed_html( $allowed_html );
}
// Is there a closing XHTML slash at the end of the attributes?
$xhtml_slash = '';
if ( preg_match( '%\s*/\s*$%', $attr ) ) {
$xhtml_slash = ' /';
}
// Are any attributes allowed at all for this element?
$element_low = strtolower( $element );
if ( empty( $allowed_html[ $element_low ] ) || true === $allowed_html[ $element_low ] ) {
return "<$element$xhtml_slash>";
}
// Split it.
$attrarr = wp_kses_hair( $attr, $allowed_protocols );
// Check if there are attributes that are required.
$required_attrs = array_filter(
$allowed_html[ $element_low ],
static function ( $required_attr_limits ) {
return isset( $required_attr_limits['required'] ) && true === $required_attr_limits['required'];
}
);
/*
* If a required attribute check fails, we can return nothing for a self-closing tag,
* but for a non-self-closing tag the best option is to return the element with attributes,
* as KSES doesn't handle matching the relevant closing tag.
*/
$stripped_tag = '';
if ( empty( $xhtml_slash ) ) {
$stripped_tag = "<$element>";
}
// Go through $attrarr, and save the allowed attributes for this element in $attr2.
$attr2 = '';
foreach ( $attrarr as $arreach ) {
// Check if this attribute is required.
$required = isset( $required_attrs[ strtolower( $arreach['name'] ) ] );
if ( wp_kses_attr_check( $arreach['name'], $arreach['value'], $arreach['whole'], $arreach['vless'], $element, $allowed_html ) ) {
$attr2 .= ' ' . $arreach['whole'];
// If this was a required attribute, we can mark it as found.
if ( $required ) {
unset( $required_attrs[ strtolower( $arreach['name'] ) ] );
}
} elseif ( $required ) {
// This attribute was required, but didn't pass the check. The entire tag is not allowed.
return $stripped_tag;
}
}
// If some required attributes weren't set, the entire tag is not allowed.
if ( ! empty( $required_attrs ) ) {
return $stripped_tag;
}
// Remove any "<" or ">" characters.
$attr2 = preg_replace( '/[<>]/', '', $attr2 );
return "<$element$attr2$xhtml_slash>";
}
/**
* Determines whether an attribute is allowed.
*
* @since 4.2.3
* @since 5.0.0 Added support for `data-*` wildcard attributes.
*
* @param string $name The attribute name. Passed by reference. Returns empty string when not allowed.
* @param string $value The attribute value. Passed by reference. Returns a filtered value.
* @param string $whole The `name=value` input. Passed by reference. Returns filtered input.
* @param string $vless Whether the attribute is valueless. Use 'y' or 'n'.
* @param string $element The name of the element to which this attribute belongs.
* @param array $allowed_html The full list of allowed elements and attributes.
* @return bool Whether or not the attribute is allowed.
*/
function wp_kses_attr_check( &$name, &$value, &$whole, $vless, $element, $allowed_html ) {
$name_low = strtolower( $name );
$element_low = strtolower( $element );
if ( ! isset( $allowed_html[ $element_low ] ) ) {
$name = '';
$value = '';
$whole = '';
return false;
}
$allowed_attr = $allowed_html[ $element_low ];
if ( ! isset( $allowed_attr[ $name_low ] ) || '' === $allowed_attr[ $name_low ] ) {
/*
* Allow `data-*` attributes.
*
* When specifying `$allowed_html`, the attribute name should be set as
* `data-*` (not to be mixed with the HTML 4.0 `data` attribute, see
* https://www.w3.org/TR/html40/struct/objects.html#adef-data).
*
* Note: the attribute name should only contain `A-Za-z0-9_-` chars.
*/
if ( str_starts_with( $name_low, 'data-' ) && ! empty( $allowed_attr['data-*'] )
&& preg_match( '/^data-[a-z0-9_-]+$/', $name_low, $match )
) {
/*
* Add the whole attribute name to the allowed attributes and set any restrictions
* for the `data-*` attribute values for the current element.
*/
$allowed_attr[ $match[0] ] = $allowed_attr['data-*'];
} else {
$name = '';
$value = '';
$whole = '';
return false;
}
}
if ( 'style' === $name_low ) {
$new_value = safecss_filter_attr( $value );
if ( empty( $new_value ) ) {
$name = '';
$value = '';
$whole = '';
return false;
}
$whole = str_replace( $value, $new_value, $whole );
$value = $new_value;
}
if ( is_array( $allowed_attr[ $name_low ] ) ) {
// There are some checks.
foreach ( $allowed_attr[ $name_low ] as $currkey => $currval ) {
if ( ! wp_kses_check_attr_val( $value, $vless, $currkey, $currval ) ) {
$name = '';
$value = '';
$whole = '';
return false;
}
}
}
return true;
}
/**
* Builds an attribute list from string containing attributes.
*
* This function does a lot of work. It parses an attribute list into an array
* with attribute data, and tries to do the right thing even if it gets weird
* input. It will add quotes around attribute values that don't have any quotes
* or apostrophes around them, to make it easier to produce HTML code that will
* conform to W3C's HTML specification. It will also remove bad URL protocols
* from attribute values. It also reduces duplicate attributes by using the
* attribute defined first (`foo='bar' foo='baz'` will result in `foo='bar'`).
*
* @since 1.0.0
*
* @param string $attr Attribute list from HTML element to closing HTML element tag.
* @param string[] $allowed_protocols Array of allowed URL protocols.
* @return array[] Array of attribute information after parsing.
*/
function wp_kses_hair( $attr, $allowed_protocols ) {
$attrarr = array();
$mode = 0;
$attrname = '';
$uris = wp_kses_uri_attributes();
// Loop through the whole attribute list.
while ( strlen( $attr ) !== 0 ) {
$working = 0; // Was the last operation successful?
switch ( $mode ) {
case 0:
if ( preg_match( '/^([_a-zA-Z][-_a-zA-Z0-9:.]*)/', $attr, $match ) ) {
$attrname = $match[1];
$working = 1;
$mode = 1;
$attr = preg_replace( '/^[_a-zA-Z][-_a-zA-Z0-9:.]*/', '', $attr );
}
break;
case 1:
if ( preg_match( '/^\s*=\s*/', $attr ) ) { // Equals sign.
$working = 1;
$mode = 2;
$attr = preg_replace( '/^\s*=\s*/', '', $attr );
break;
}
if ( preg_match( '/^\s+/', $attr ) ) { // Valueless.
$working = 1;
$mode = 0;
if ( false === array_key_exists( $attrname, $attrarr ) ) {
$attrarr[ $attrname ] = array(
'name' => $attrname,
'value' => '',
'whole' => $attrname,
'vless' => 'y',
);
}
$attr = preg_replace( '/^\s+/', '', $attr );
}
break;
case 2:
if ( preg_match( '%^"([^"]*)"(\s+|/?$)%', $attr, $match ) ) {
// "value"
$thisval = $match[1];
if ( in_array( strtolower( $attrname ), $uris, true ) ) {
$thisval = wp_kses_bad_protocol( $thisval, $allowed_protocols );
}
if ( false === array_key_exists( $attrname, $attrarr ) ) {
$attrarr[ $attrname ] = array(
'name' => $attrname,
'value' => $thisval,
'whole' => "$attrname=\"$thisval\"",
'vless' => 'n',
);
}
$working = 1;
$mode = 0;
$attr = preg_replace( '/^"[^"]*"(\s+|$)/', '', $attr );
break;
}
if ( preg_match( "%^'([^']*)'(\s+|/?$)%", $attr, $match ) ) {
// 'value'
$thisval = $match[1];
if ( in_array( strtolower( $attrname ), $uris, true ) ) {
$thisval = wp_kses_bad_protocol( $thisval, $allowed_protocols );
}
if ( false === array_key_exists( $attrname, $attrarr ) ) {
$attrarr[ $attrname ] = array(
'name' => $attrname,
'value' => $thisval,
'whole' => "$attrname='$thisval'",
'vless' => 'n',
);
}
$working = 1;
$mode = 0;
$attr = preg_replace( "/^'[^']*'(\s+|$)/", '', $attr );
break;
}
if ( preg_match( "%^([^\s\"']+)(\s+|/?$)%", $attr, $match ) ) {
// value
$thisval = $match[1];
if ( in_array( strtolower( $attrname ), $uris, true ) ) {
$thisval = wp_kses_bad_protocol( $thisval, $allowed_protocols );
}
if ( false === array_key_exists( $attrname, $attrarr ) ) {
$attrarr[ $attrname ] = array(
'name' => $attrname,
'value' => $thisval,
'whole' => "$attrname=\"$thisval\"",
'vless' => 'n',
);
}
// We add quotes to conform to W3C's HTML spec.
$working = 1;
$mode = 0;
$attr = preg_replace( "%^[^\s\"']+(\s+|$)%", '', $attr );
}
break;
} // End switch.
if ( 0 === $working ) { // Not well-formed, remove and try again.
$attr = wp_kses_html_error( $attr );
$mode = 0;
}
} // End while.
if ( 1 === $mode && false === array_key_exists( $attrname, $attrarr ) ) {
/*
* Special case, for when the attribute list ends with a valueless
* attribute like "selected".
*/
$attrarr[ $attrname ] = array(
'name' => $attrname,
'value' => '',
'whole' => $attrname,
'vless' => 'y',
);
}
return $attrarr;
}
/**
* Finds all attributes of an HTML element.
*
* Does not modify input. May return "evil" output.
*
* Based on `wp_kses_split2()` and `wp_kses_attr()`.
*
* @since 4.2.3
*
* @param string $element HTML element.
* @return array|false List of attributes found in the element. Returns false on failure.
*/
function wp_kses_attr_parse( $element ) {
$valid = preg_match( '%^(<\s*)(/\s*)?([a-zA-Z0-9]+\s*)([^>]*)(>?)$%', $element, $matches );
if ( 1 !== $valid ) {
return false;
}
$begin = $matches[1];
$slash = $matches[2];
$elname = $matches[3];
$attr = $matches[4];
$end = $matches[5];
if ( '' !== $slash ) {
// Closing elements do not get parsed.
return false;
}
// Is there a closing XHTML slash at the end of the attributes?
if ( 1 === preg_match( '%\s*/\s*$%', $attr, $matches ) ) {
$xhtml_slash = $matches[0];
$attr = substr( $attr, 0, -strlen( $xhtml_slash ) );
} else {
$xhtml_slash = '';
}
// Split it.
$attrarr = wp_kses_hair_parse( $attr );
if ( false === $attrarr ) {
return false;
}
// Make sure all input is returned by adding front and back matter.
array_unshift( $attrarr, $begin . $slash . $elname );
array_push( $attrarr, $xhtml_slash . $end );
return $attrarr;
}
/**
* Builds an attribute list from string containing attributes.
*
* Does not modify input. May return "evil" output.
* In case of unexpected input, returns false instead of stripping things.
*
* Based on `wp_kses_hair()` but does not return a multi-dimensional array.
*
* @since 4.2.3
*
* @param string $attr Attribute list from HTML element to closing HTML element tag.
* @return array|false List of attributes found in $attr. Returns false on failure.
*/
function wp_kses_hair_parse( $attr ) {
if ( '' === $attr ) {
return array();
}
$regex =
'(?:
[_a-zA-Z][-_a-zA-Z0-9:.]* # Attribute name.
|
\[\[?[^\[\]]+\]\]? # Shortcode in the name position implies unfiltered_html.
)
(?: # Attribute value.
\s*=\s* # All values begin with "=".
(?:
"[^"]*" # Double-quoted.
|
\'[^\']*\' # Single-quoted.
|
[^\s"\']+ # Non-quoted.
(?:\s|$) # Must have a space.
)
|
(?:\s|$) # If attribute has no value, space is required.
)
\s* # Trailing space is optional except as mentioned above.
';
/*
* Although it is possible to reduce this procedure to a single regexp,
* we must run that regexp twice to get exactly the expected result.
*
* Note: do NOT remove the `x` modifiers as they are essential for the above regex!
*/
$validation = "/^($regex)+$/x";
$extraction = "/$regex/x";
if ( 1 === preg_match( $validation, $attr ) ) {
preg_match_all( $extraction, $attr, $attrarr );
return $attrarr[0];
} else {
return false;
}
}
/**
* Performs different checks for attribute values.
*
* The currently implemented checks are "maxlen", "minlen", "maxval", "minval",
* and "valueless".
*
* @since 1.0.0
*
* @param string $value Attribute value.
* @param string $vless Whether the attribute is valueless. Use 'y' or 'n'.
* @param string $checkname What $checkvalue is checking for.
* @param mixed $checkvalue What constraint the value should pass.
* @return bool Whether check passes.
*/
function wp_kses_check_attr_val( $value, $vless, $checkname, $checkvalue ) {
$ok = true;
switch ( strtolower( $checkname ) ) {
case 'maxlen':
/*
* The maxlen check makes sure that the attribute value has a length not
* greater than the given value. This can be used to avoid Buffer Overflows
* in WWW clients and various Internet servers.
*/
if ( strlen( $value ) > $checkvalue ) {
$ok = false;
}
break;
case 'minlen':
/*
* The minlen check makes sure that the attribute value has a length not
* smaller than the given value.
*/
if ( strlen( $value ) < $checkvalue ) {
$ok = false;
}
break;
case 'maxval':
/*
* The maxval check does two things: it checks that the attribute value is
* an integer from 0 and up, without an excessive amount of zeroes or
* whitespace (to avoid Buffer Overflows). It also checks that the attribute
* value is not greater than the given value.
* This check can be used to avoid Denial of Service attacks.
*/
if ( ! preg_match( '/^\s{0,6}[0-9]{1,6}\s{0,6}$/', $value ) ) {
$ok = false;
}
if ( $value > $checkvalue ) {
$ok = false;
}
break;
case 'minval':
/*
* The minval check makes sure that the attribute value is a positive integer,
* and that it is not smaller than the given value.
*/
if ( ! preg_match( '/^\s{0,6}[0-9]{1,6}\s{0,6}$/', $value ) ) {
$ok = false;
}
if ( $value < $checkvalue ) {
$ok = false;
}
break;
case 'valueless':
/*
* The valueless check makes sure if the attribute has a value
* (like `
`) or not (`