Gestionnaire de fichiers - Editer - /home/wwgoat/public_html/blog/mkdumprd.tar
Arrière
usr/sbin/mkdumprd 0000755 00000033767 14720725162 0010107 0 ustar 00 #!/bin/bash --norc # New mkdumprd # # Copyright 2011 Red Hat, Inc. # # Written by Cong Wang <amwang@redhat.com> # . /lib/kdump/kdump-lib.sh export IN_KDUMP=1 conf_file="/etc/kdump.conf" SSH_KEY_LOCATION="/root/.ssh/kdump_id_rsa" SAVE_PATH=$(grep ^path $conf_file| cut -d' ' -f2) [ -z "$SAVE_PATH" ] && SAVE_PATH=$DEFAULT_PATH # strip the duplicated "/" SAVE_PATH=$(echo $SAVE_PATH | tr -s /) is_wdt_addition_needed() { local active is_wdt_mod_omitted [[ $? -eq 0 ]] && return 1 [[ -d /sys/class/watchdog/ ]] || return 1 for dir in /sys/class/watchdog/*; do [[ -f "$dir/state" ]] || continue active=$(< "$dir/state") [[ "$active" = "active" ]] && return 0 done return 1 } WDTCFG="" is_wdt_addition_needed [[ $? -eq 0 ]] && WDTCFG="-a watchdog" extra_modules="" if has_hpwdt; then extra_modules=hpwdt fi dracut_args=("--quiet" "--hostonly" "--hostonly-cmdline" "--hostonly-i18n" "--hostonly-mode" "strict" "-o" "plymouth dash resume ifcfg" $WDTCFG) OVERRIDE_RESETTABLE=0 add_dracut_arg() { local arg qarg is_quoted=0 while [ $# -gt 0 ]; do arg="${1//\'/\"}" #Handle quoted substring properly for passing it to dracut_args array. if [ $is_quoted -eq 0 ]; then if [[ "$arg" == "\"" ]] || [[ $arg != ${arg#\"} ]]; then is_quoted=1 arg=${arg#\"} fi fi if [ $is_quoted -eq 1 ]; then qarg="$qarg $arg" if [[ "$arg" == "\"" ]] || [[ $arg != ${arg%\"} ]]; then is_quoted=0 arg=${qarg%\"} qarg="" else shift continue fi fi dracut_args+=("$arg") shift done } add_dracut_module() { add_dracut_arg "--add" "$1" } add_dracut_mount() { add_dracut_arg "--mount" "$1" } add_dracut_sshkey() { add_dracut_arg "--sshkey" "$1" } # Generic substring function. If $2 is in $1, return 0. strstr() { [[ $1 =~ $2 ]]; } # caller should ensure $1 is valid and mounted in 1st kernel to_mount() { local _dev=$1 _source _target _fstype _options _mntopts _pdev _source=$(findmnt -k -f -n -r -o SOURCE $_dev) _target=$(get_mntpoint_from_target $_dev) # mount under /sysroot if dump to root disk or mount under #/kdumproot/$_target in other cases in 2nd kernel. systemd #will be in charge to umount it. if [ "$_target" = "/" ];then _target="/sysroot" else _target="/kdumproot/$_target" fi _fstype=$(findmnt -k -f -n -r -o FSTYPE $_dev) [[ -e /etc/fstab ]] && _options=$(findmnt --fstab -f -n -r -o OPTIONS $_dev) [ -z "$_options" ] && _options=$(findmnt -k -f -n -r -o OPTIONS $_dev) # mount fs target as rw in 2nd kernel _options=$(echo $_options | sed 's/\(^\|,\)ro\($\|,\)/\1rw\2/g') # with 'noauto' in fstab nfs and non-root disk mount will fail in 2nd # kernel, filter it out here. _options=$(echo $_options | sed 's/\(^\|,\)noauto\($\|,\)/\1/g') # drop nofail or nobootwait _options=$(echo $_options | sed 's/\(^\|,\)nofail\($\|,\)/\1/g') _options=$(echo $_options | sed 's/\(^\|,\)nobootwait\($\|,\)/\1/g') _mntopts="$_target $_fstype $_options" #for non-nfs _dev converting to use udev persistent name if [ -b "$_source" ]; then _pdev="$(kdump_get_persistent_dev $_source $_fstype)" if [ $? -ne 0 ]; then return 1 fi else _pdev=$_dev fi echo "$_pdev $_mntopts" } is_readonly_mount() { local _mnt _mnt=$(findmnt -k -f -n -r -o OPTIONS $1) #fs/proc_namespace.c: show_mountinfo(): #seq_puts(m, mnt->mnt_flags & MNT_READONLY ? " ro" : " rw"); [[ "$_mnt" =~ ^ro ]] } #Function: get_ssh_size #$1=dump target #called from while loop and shouldn't read from stdin, so we're using "ssh -n" get_ssh_size() { local _opt _out _size _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes" _out=$(ssh -q -n $_opt $1 "df -P $SAVE_PATH") [ $? -ne 0 ] && { perror_exit "checking remote ssh server available size failed." } #ssh output removed the line break, so print field NF-2 _size=$(echo -n $_out| awk '{avail=NF-2; print $avail}') echo -n $_size } #mkdir if save path does not exist on ssh dump target #$1=ssh dump target #caller should ensure write permission on $1:$SAVE_PATH #called from while loop and shouldn't read from stdin, so we're using "ssh -n" mkdir_save_path_ssh() { local _opt _dir _opt="-i $SSH_KEY_LOCATION -o BatchMode=yes -o StrictHostKeyChecking=yes" ssh -qn $_opt $1 mkdir -p $SAVE_PATH 2>&1 > /dev/null _ret=$? if [ $_ret -ne 0 ]; then perror_exit "mkdir failed on $1:$SAVE_PATH" fi #check whether user has write permission on $1:$SAVE_PATH _dir=$(ssh -qn $_opt $1 mktemp -dqp $SAVE_PATH 2>/dev/null) _ret=$? if [ $_ret -ne 0 ]; then perror_exit "Could not create temporary directory on $1:$SAVE_PATH. Make sure user has write permission on destination" fi ssh -qn $_opt $1 rmdir $_dir return 0 } #Function: get_fs_size #$1=dump target get_fs_size() { local _mnt=$(get_mntpoint_from_target $1) echo -n $(df -P "${_mnt}/$SAVE_PATH"|tail -1|awk '{print $4}') } #Function: get_raw_size #$1=dump target get_raw_size() { echo -n $(fdisk -s "$1") } #Function: check_size #$1: dump type string ('raw', 'fs', 'ssh') #$2: dump target check_size() { local avail memtotal memtotal=$(awk '/MemTotal/{print $2}' /proc/meminfo) case "$1" in raw) avail=$(get_raw_size "$2") ;; ssh) avail=$(get_ssh_size "$2") ;; fs) avail=$(get_fs_size "$2") ;; *) return esac if [ $? -ne 0 ]; then perror_exit "Check dump target size failed" fi if [ $avail -lt $memtotal ]; then echo "Warning: There might not be enough space to save a vmcore." echo " The size of $2 should be greater than $memtotal kilo bytes." fi } # $1: core_collector config value verify_core_collector() { if grep -q "^raw" $conf_file && [ "${1%% *}" != "makedumpfile" ]; then echo "Warning: specifying a non-makedumpfile core collector, you will have to recover the vmcore manually." fi if is_ssh_dump_target || is_raw_dump_target; then if [ "${1%% *}" = "makedumpfile" ]; then ! strstr "$1" "-F" && { perror_exit "The specified dump target needs makedumpfile \"-F\" option." } fi fi } add_mount() { local _mnt=$(to_mount "$1") if [ $? -ne 0 ]; then exit 1 fi add_dracut_mount "$_mnt" } # get_maj_min <device> # Prints the major and minor of a device node. # Example: # $ get_maj_min /dev/sda2 # 8:2 get_maj_min() { local _dev _dev=$(stat -L -c '$((0x%t)):$((0x%T))' "$1" 2>/dev/null) _dev=$(eval "echo $_dev") echo $_dev } # ugly workaround for the lvm design # There is no volume group device, # so, there are no slave devices for volume groups. # Logical volumes only have the slave devices they really live on, # but you cannot create the logical volume without the volume group. # And the volume group might be bigger than the devices the LV needs. check_vol_slaves() { local _lv _vg _pv for i in /dev/mapper/*; do _lv=$(get_maj_min $i) if [[ $_lv = $2 ]]; then _vg=$(lvm lvs --noheadings -o vg_name $i 2>/dev/null) # strip space _vg=$(echo $_vg) if [[ $_vg ]]; then for _pv in $(lvm vgs --noheadings -o pv_name "$_vg" 2>/dev/null) do check_block_and_slaves $1 $(get_maj_min $_pv) && return 0 done fi fi done return 1 } # Walk all the slave relationships for a given block device. # Stop when our helper function returns success # $1 = function to call on every found block device # $2 = block device in major:minor format check_block_and_slaves() { local _x [[ -b /dev/block/$2 ]] || return 1 # Not a block device? So sorry. "$1" $2 && return check_vol_slaves "$@" && return 0 if [[ -f /sys/dev/block/$2/../dev ]]; then check_block_and_slaves $1 $(cat "/sys/dev/block/$2/../dev") && return 0 fi [[ -d /sys/dev/block/$2/slaves ]] || return 1 for _x in /sys/dev/block/$2/slaves/*/dev; do [[ -f $_x ]] || continue check_block_and_slaves $1 $(cat "$_x") && return 0 done return 1 } #handle the case user does not specify the dump target explicitly handle_default_dump_target() { local _target local _mntpoint is_user_configured_dump_target && return check_save_path_fs $SAVE_PATH _mntpoint=$(get_mntpoint_from_path $SAVE_PATH) _target=$(get_target_from_path $SAVE_PATH) if is_atomic && is_bind_mount $_mntpoint; then SAVE_PATH=${SAVE_PATH##"$_mntpoint"} # the real dump path in the 2nd kernel, if the mount point is bind mounted. SAVE_PATH=$(get_bind_mount_directory $_mntpoint)/$SAVE_PATH _mntpoint=$(get_mntpoint_from_target $_target) # the absolute path in the 1st kernel SAVE_PATH=$_mntpoint/$SAVE_PATH fi SAVE_PATH=${SAVE_PATH##"$_mntpoint"} add_mount "$_target" check_size fs $_target } get_override_resettable() { local override_resettable override_resettable=$(grep "^override_resettable" $conf_file) if [ -n "$override_resettable" ]; then OVERRIDE_RESETTABLE=$(echo $override_resettable | cut -d' ' -f2) if [ "$OVERRIDE_RESETTABLE" != "0" ] && [ "$OVERRIDE_RESETTABLE" != "1" ];then perror_exit "override_resettable value $OVERRIDE_RESETTABLE is invalid" fi fi } # $1: function name for_each_block_target() { local dev majmin for dev in $(get_kdump_targets); do [ -b "$dev" ] || continue majmin=$(get_maj_min $dev) check_block_and_slaves $1 $majmin && return 1 done return 0 } #judge if a specific device with $1 is unresettable #return false if unresettable. is_unresettable() { local path="/sys/$(udevadm info --query=all --path=/sys/dev/block/$1 | awk '/^P:/ {print $2}' | sed -e 's/\(cciss[0-9]\+\/\).*/\1/g' -e 's/\/block\/.*$//')/resettable" local resettable=1 if [ -f "$path" ] then resettable="$(cat $path)" [ $resettable -eq 0 -a "$OVERRIDE_RESETTABLE" -eq 0 ] && { local device=$(udevadm info --query=all --path=/sys/dev/block/$1 | awk -F= '/DEVNAME/{print $2}') echo "Error: Can not save vmcore because device $device is unresettable" return 0 } fi return 1 } #check if machine is resettable. #return true if resettable check_resettable() { local _ret _target get_override_resettable for_each_block_target is_unresettable _ret=$? [ $_ret -eq 0 ] && return return 1 } # $1: maj:min is_crypt() { local majmin=$1 dev line ID_FS_TYPE="" line=$(udevadm info --query=property --path=/sys/dev/block/$majmin \ | grep "^ID_FS_TYPE") eval "$line" [[ "$ID_FS_TYPE" = "crypto_LUKS" ]] && { dev=$(udevadm info --query=all --path=/sys/dev/block/$majmin | awk -F= '/DEVNAME/{print $2}') echo "Device $dev is encrypted." return 0 } return 1 } check_crypt() { local _ret _target for_each_block_target is_crypt _ret=$? [ $_ret -eq 0 ] && return return 1 } if ! check_resettable; then exit 1 fi if ! check_crypt; then echo "Warning: Encrypted device is in dump path. User will prompted for password during second kernel boot." fi # firstly get right SSH_KEY_LOCATION keyfile=$(awk '/^sshkey/ {print $2}' $conf_file) if [ -f "$keyfile" ]; then # canonicalize the path SSH_KEY_LOCATION=$(/usr/bin/readlink -m $keyfile) fi if [ "$(uname -m)" = "s390x" ]; then add_dracut_module "znet" fi while read config_opt config_val; do # remove inline comments after the end of a directive. case "$config_opt" in extra_modules) extra_modules="$extra_modules $config_val" ;; ext[234]|xfs|btrfs|minix|nfs) if ! findmnt $config_val >/dev/null; then perror_exit "Dump target $config_val is probably not mounted." fi _absolute_save_path=$(make_absolute_save_path $config_val) _mntpoint=$(get_mntpoint_from_path $_absolute_save_path) if is_atomic && is_bind_mount $_mntpoint; then SAVE_PATH=${_absolute_save_path##"$_mntpoint"} # the real dump path in the 2nd kernel, if the mount point is bind mounted. SAVE_PATH=$(get_bind_mount_directory $_mntpoint)/$SAVE_PATH fi add_mount "$config_val" check_save_path_fs $_absolute_save_path check_size fs $config_val ;; raw) #checking raw disk writable dd if=$config_val count=1 of=/dev/null > /dev/null 2>&1 || { perror_exit "Bad raw disk $config_val" } _praw=$(kdump_get_persistent_dev $config_val "raw") if [ $? -ne 0 ]; then exit 1 fi add_dracut_arg "--device" "$_praw" check_size raw $config_val ;; ssh) if strstr "$config_val" "@"; then check_size ssh $config_val mkdir_save_path_ssh $config_val add_dracut_module "ssh-client" add_dracut_sshkey "$SSH_KEY_LOCATION" else perror_exit "Bad ssh dump target $config_val" fi ;; core_collector) verify_core_collector "$config_val" ;; dracut_args) add_dracut_arg $config_val ;; *) ;; esac done <<< "$(read_strip_comments $conf_file)" handle_default_dump_target if [ -n "$extra_modules" ] then add_dracut_arg "--add-drivers" "$extra_modules" fi if ! is_fadump_capable; then # The 2nd rootfs mount stays behind the normal dump target mount, # so it doesn't affect the logic of check_dump_fs_modified(). is_dump_to_rootfs && add_mount "$(to_dev_name $(get_root_fs_device))" add_dracut_arg "--no-hostonly-default-device" fi dracut "${dracut_args[@]}" "$@" _rc=$? sync exit $_rc
| ver. 1.4 |
Github
|
.
| PHP 8.0.30 | Génération de la page: 0.01 |
proxy
|
phpinfo
|
Réglages